Skip to main content

Pre-consulting

Image
By

So many of us have a quick question to ask for corrosion, but are afraid to employ a consultant, probably because of funds or the issues may not seem so big.


Hence, here is a form to help with primary questions before deciding to go ahead with consulting.


Fill in the form below and I will get back to you with a primary answer.



Comments

Post a Comment

Welcome to the CORROSPECTIVE BLOG! Scroll along for more posts! Looking forward to your feedback!
P.S. Don't forget to check out the free quizzes!

Popular posts from this blog

Types of MARINE corrosion

By
Types of MARINE corrosion The marine environment is one of the most corrosive environments.  Its corrosivity is due to the ionic concentration of the seas and oceans, temperature variations, wind velocities, depth of the sea, and biological elements. As a result, the corrosion on marine structures such as ships, FPSO, and offshore platforms, appears in multiple forms. Hence, it is important to learn about the basic types of corrosion as applicable to the marine environment. Some of these types of corrosion in a marine environment are - Uniform corrosion due to sodium, magnesium, and calcium salts Uniform corrosion is characterized by the removal of the material all over the surface. It leads to thinning of the walls. Pitting in active-passive alloys such as aluminium Active-passive alloys have a thin oxide film on the surface. A small break due to the chlorides in the seawater allows the penetration of the water and ions, leading to pit formation. Crevice corrosion in fixtures and ...
Post a Comment
Read more

3 steps to begin experiments...aka...I am lost in this lab!

By
  All the students in the first few days of research are faced with the dilemma of the right time and way to begin experimentation. There are as many ways and thought processes to do so as there are people. I will share my learnings here. The problem is that the literature review tends to become so vast that it is difficult to decide what the exact problem is. 1. The best way is to NOT WAIT for the literature review to get over. Begin with the experiments simultaneously. Gain experience on as many new techniques as possible. 2. Start with that research paper which will most likely form the basis of your work. Attempt to reproduce the experiments in the paper. Try to see what other experiments can corroborate those results. 3. Select the correct research papers to continue the literature review. P.S. All the experiments should have a reason for doing them. You should be able to answer the question 'Why should I do this experiment? What will I learn?'
Post a Comment
Read more

The drain mystery

By
I recently moved to a new house. As expected, there was a lot of cleaning up to do. One of the tasks was the cleaning of the washbasin. Usually, the drain is a circular part with  5 to 6 holes for the water to flow out. What I saw was this - I have not had a chance to analyse the material of the drain. However, a quick search tells me that this is most probably stainless steel. The water that this drain is exposed to is the bore water. Thus, the drain has encountered a lot of chlorides. There is general as well as localized corrosion. The damage started off as a simple process of pitting. Pitting due to chlorides is one of the most common headaches for poor stainless steel. They break the passive oxide film, and reach the underlying fresh iron. This iron then reacts with the usual suspects (ions, oxygen, water) and forms what we see as the rust. As can be seen in the picture, the thin sections of the drain between the holes have disappeared in three places. This may have h...
Post a Comment
Read more