What is a Corrosion Loop - PART 2 - EXAMPLE

How to prepare a corrosion loop?

To prepare a corrosion loop, the person in charge will look at the overall picture and answer the following questions -

1. What is the process?

2. What are the components?

3. What are the materials for each component?

4. What are the common features among them?

5. Where does the commonality end? - This is important as that will mark the beginning of a new corrosion loop.

6. Can I use the same inspection procedure for all of them?

7. Do they corrode/get damaged in the same manner due to the same reasons?

WATCH THE VIDEO FOR A DETAILED EXPLANATION -

Read part 1 here!

https://corrospective.com/

😀Happy learning!😀

Comments

What is a Corrosion Loop - PART 1 - CONCEPT

Corrosion loop is used to simplify inspection procedures in refining processes. Corrosion loop is defined as a group of components with common materials, processes, and operating parameters. Source: Rachman, A. and Ratnayake, R.M.C. (2020), "Corrosion loop development of oil and gas piping system based on machine learning and group technology method", Journal of Quality in Maintenance Engineering, Vol. 26 No. 3, pp. 349-368. https://doi.org/10.1108/JQME-07-2018-0058 It is needed when the scenario has - 1. Complex process 2. Several variables such a materials of construction, process parameters, functions 3. Multiple damage mechanisms WATCH THE VIDEO FOR A DETAILED EXPLANATION - Click here for part 2 ! https://corrospective.com/ 😀Happy learning! 😀

Thesis flowchart...aka...How to decide what to write first in your thesis?

It was that moment in my thesis writing when I had received a terrible feedback and was asked to overhaul the entire document. It was time to take a break from the screen and go back to basics. I printed out my document and went home. Then I took a break that evening, because it is one of the most underrated but essential things to get everything into perspective. The next day I proceeded to lay out the pages of my thesis chapter-wise on the table. Then I took a blank paper and pad. I thought, "How will I explain my work to my family members in my native language?" So I decided to write down my work in my native language in the form of an algorithm and then rearrange my thesis. I answered the following questions to do so - What is the issue? Where is it encountered? Is it very common? What makes it so very important? What are the steps that people have already taken to solve it? Why have they not been that effective? What is it that I did to solve the issue? How did I do it? ...

Corrosion rate and pipe design

Corrosion is a serious issue. However, corrosion engineers are rarely asked about it during the designing of components. It is only when the components fail that people remember there are people who have studied corrosion for their whole life and would provide a solution. The design problems are really quite simple, and the loss of money could have been avoided had the company bothered to involve a corrosion engineer in the first place. Let me illustrate this with an example of a factory near the sea. Suppose a mild steel pipe is fitted inside the factory to transport 1 wt. % hydrochloric acid. The engineer has a choice between selecting pipes of 5 mm and 10 mm thickness. To save money, they go for the pipe with the 5 mm thickness because it has been 'successfully used by the other customers'. Over the course of a year, it is seen that the pipe has started leaking at certain places. Further investigation reveals that those sections have thinned to half of their thickn...

Search This Blog