Skip to main content

Corrosion quiz - 4

 Corrosion quiz - 4




Done? Click here for the next quiz!

Check out the corrosion planning in AST here!



😀Happy learning!😀

Comments

Popular posts from this blog

What is a Corrosion Loop - PART 2 - EXAMPLE

How to prepare a corrosion loop? To prepare a corrosion loop, the person in charge will look at the overall picture and answer the following questions - 1. What is the process? 2. What are the components? 3. What are the materials for each component? 4. What are the common features among them? 5. Where does the commonality end? -  This is important as that will mark the beginning of a new corrosion loop. 6. Can I use the same inspection procedure for all of them? 7. Do they corrode/get damaged in the same manner due to the same reasons? WATCH THE VIDEO FOR A DETAILED EXPLANATION -       Read part 1 here! https://corrospective.com/ 😀Happy learning! 😀

Corrosion - the bane of all the industries

Corrosion is the journey of an element from its most active form to its most stable form.  The birth At the place of its birth, inside the earth, an element such as iron comes into contact with atmospheric oxygen, chlorides, sulphate, and moisture. and is quite happy to remain in peace with them in the form of Fe 2 O 3 , Fe 3 O 4 , FeCl 3 and such. The growth It is then extracted and made to go through a number of processes which separate it from the ions and bring it to its elemental form. It is then put into use to make steel, where it coexists with carbon, manganese, chromium, and other alloying elements. The interaction However, iron has three electrons that it desperately need to give away. That is exactly what it does the moment the steel is brought out from the factory and put outside in the shed. Iron is more than happy to reunite with its old buddies - oxygen and moisture. It gladly gives away its electrons to them and returns to its peaceful state of Fe 2 O 3...

Corrosion in daily life - Steel frames on a balcony

Corrosion in daily life - Steel frames Looking at LinkedIn, corrosion may feel like an extremely intricate issue seen in large industries. However, looking around, we can see corrosion everywhere! Where was this photo taken? The photo above is of a steel frame attached to a balcony.  The part shown here is the bottom part of the frame. The coatings for such steel parts usually serve the purpose of moderate corrosion protection and more of aesthetics. If you observe, the thickness of the coatings also does not seem to be a lot. Why did the coating degrade? When it rains, the rainwater collects on the bottom of the frames.  This degrades the coating. At the places where it is not perfect anyway, the underlying steel is free to corrode. Most importantly, corrosion is more severe at the edges. It is severe enough to chip off the material entirely. That point is a prime site for crack formation and breaking of the frame. Have you seen such corrosion in your balcony fram...