Skip to main content

Corrosion in daily life - Steel frames on a balcony

Corrosion in daily life - Steel frames




Looking at LinkedIn, corrosion may feel like an extremely intricate issue seen in large industries.


However, looking around, we can see corrosion everywhere!

Where was this photo taken?

The photo above is of a steel frame attached to a balcony. 


The part shown here is the bottom part of the frame.

The coatings for such steel parts usually serve the purpose of moderate corrosion protection and more of aesthetics. If you observe, the thickness of the coatings also does not seem to be a lot.

Why did the coating degrade?

When it rains, the rainwater collects on the bottom of the frames. 


This degrades the coating. At the places where it is not perfect anyway, the underlying steel is free to corrode.

Most importantly, corrosion is more severe at the edges. It is severe enough to chip off the material entirely. That point is a prime site for crack formation and breaking of the frame.

Have you seen such corrosion in your balcony frame? Let me know in the comment section!

In the mean time, check out the free quizzes here!


😀Happy learning!😀



Comments

  1. A quick dose of daily corrosion. Thanks for posting ma'am.

    ReplyDelete
  2. I would look in to it as forgotton phenomena. It is true that we see such instances in our day-to-life.

    ReplyDelete
    Replies
    1. That is a great idea! Thank you for your suggestion!

      Delete

Post a Comment

Welcome to the CORROSPECTIVE BLOG! Scroll along for more posts! Looking forward to your feedback!
P.S. Don't forget to check out the free quizzes!

Popular posts from this blog

What is a Corrosion Loop - PART 2 - EXAMPLE

How to prepare a corrosion loop? To prepare a corrosion loop, the person in charge will look at the overall picture and answer the following questions - 1. What is the process? 2. What are the components? 3. What are the materials for each component? 4. What are the common features among them? 5. Where does the commonality end? -  This is important as that will mark the beginning of a new corrosion loop. 6. Can I use the same inspection procedure for all of them? 7. Do they corrode/get damaged in the same manner due to the same reasons? WATCH THE VIDEO FOR A DETAILED EXPLANATION -       Read part 1 here! https://corrospective.com/ 😀Happy learning! 😀