Skip to main content

Corrosion in daily life - Steel frames on a balcony

Image
By

Corrosion in daily life - Steel frames




Looking at LinkedIn, corrosion may feel like an extremely intricate issue seen in large industries.


However, looking around, we can see corrosion everywhere!

Where was this photo taken?

The photo above is of a steel frame attached to a balcony. 


The part shown here is the bottom part of the frame.

The coatings for such steel parts usually serve the purpose of moderate corrosion protection and more of aesthetics. If you observe, the thickness of the coatings also does not seem to be a lot.

Why did the coating degrade?

When it rains, the rainwater collects on the bottom of the frames. 


This degrades the coating. At the places where it is not perfect anyway, the underlying steel is free to corrode.

Most importantly, corrosion is more severe at the edges. It is severe enough to chip off the material entirely. That point is a prime site for crack formation and breaking of the frame.

Have you seen such corrosion in your balcony frame? Let me know in the comment section!

In the mean time, check out the free quizzes here!


😀Happy learning!😀



Labels:

Comments

  1. Metzilla29 July 2021 at 23:27

    A quick dose of daily corrosion. Thanks for posting ma'am.

    ReplyDelete
  2. KG Nair27 October 2021 at 11:18

    I would look in to it as forgotton phenomena. It is true that we see such instances in our day-to-life.

    ReplyDelete
    Replies
    1. Dr S D Ranade28 October 2021 at 10:55

      That is a great idea! Thank you for your suggestion!

      Delete

Post a Comment

Welcome to the CORROSPECTIVE BLOG! Scroll along for more posts! Looking forward to your feedback!
P.S. Don't forget to check out the free quizzes!

Popular posts from this blog

What is Risk Based Inspection, PoF, and CoF?

By
Risk Based Inspection API 580 - API 581 RBI is an often-used word in inspection.  RBI stands for Risk Based Inspection.  RBI tries to answer the following questions - 1. Which part should I expect first?  2. Which part is the most critical? 3. How should I start inspecting it first? 4. Where is the highest risk of failure?  5. Where is the order of risk? PoF is Probability of Failure . This is answered by the following questions - 1. How likely is the failure to occur? 2. How frequently will the failure occur? 3. Is there an approximate time to failure or the number of failures per time? CoF is Consequence of failure Consequence defines how dangerous the failure will be to the resources around it. This implies the following questions - 1. What kind of failure will it be? 2. Will it damage the components? 3. Will it be harmful to human life? 4. Will it affect/contaminate the environment? The risk is calculated as follows - Risk =  PoF x CoF The number designated ...
Post a Comment
Read more

Thesis flowchart...aka...How to decide what to write first in your thesis?

By
It was that moment in my thesis writing when I had received a terrible feedback and was asked to overhaul the entire document. It was time to take a break from the screen and go back to basics. I printed out my document and went home. Then I took a break that evening, because it is one of the most underrated but essential things to get everything into perspective. The next day I proceeded to lay out the pages of my thesis chapter-wise on the table. Then I took a blank paper and pad. I thought, "How will I explain my work to my family members in my native language?" So I decided to write down my work in my native language in the form of an algorithm and then rearrange my thesis. I answered the following questions to do so - What is the issue? Where is it encountered? Is it very common? What makes it so very important? What are the steps that people have already taken to solve it? Why have they not been that effective? What is it that I did to solve the issue? How did I do it? ...
Post a Comment
Read more