Skip to main content

Corrosion quiz - 6

 Corrosion quiz - 6

Done? Click here for the previous and next!

Check out the isocorrosion charts here!



😀Happy learning!😀


Comments

Popular posts from this blog

3 steps to begin experiments...aka...I am lost in this lab!

  All the students in the first few days of research are faced with the dilemma of the right time and way to begin experimentation. There are as many ways and thought processes to do so as there are people. I will share my learnings here. The problem is that the literature review tends to become so vast that it is difficult to decide what the exact problem is. 1. The best way is to NOT WAIT for the literature review to get over. Begin with the experiments simultaneously. Gain experience on as many new techniques as possible. 2. Start with that research paper which will most likely form the basis of your work. Attempt to reproduce the experiments in the paper. Try to see what other experiments can corroborate those results. 3. Select the correct research papers to continue the literature review. P.S. All the experiments should have a reason for doing them. You should be able to answer the question 'Why should I do this experiment? What will I learn?'

Corrosion risk planning - 2 - Above ground storage tanks - oil and gas- PART 2

 Above ground storage tanks - PART 2 9.      Splash plate corrosion at welds atmospheric corrosion coating damage, if applicable pitting due to chloride salt deposition in marine environment 10.      Spiral staircase corrosion at welds of individual bars and critical joints to the tank coating damage and delamination cracks near welds uniform corrosion at exposed surface near delamination galvanic corrosion near weld/staircase/tank interface due to dissimilar alloys 11.      Manometer corrosion of screws, nuts, and bolts used for attachment possible moisture penetration in case of cracks due to improper handling 12.      Manhole Internal corrosion due to water either as a moisture or as storage product External coating damage due to moisture penetration, dust, rainfall, UV radiation Coating damage at fixtures and edges galvanic corrosion at nuts and bolts due to dissimilar alloys atmospheric corrosion at area where coating...